Business

5 Reasons to Use LED Lights in Mines

Safety is an important variable that continues to be regulated at the mines. One of the ways to make sure workers are safe is by ensuring all areas in the mines are well-lit. Failure to secure excellent and adequate lighting at the mines increases the risk of accidents and can impact mental and physical health. For example, inconsistent lighting causes eye strain, headaches, and poor morale.

Lighting up the mines can be challenging given the mining environment, including high dust content and frequent vibrations. Further, the increased focus on reducing operating costs to meet budget constraints has led to lighting shortcuts and, ultimately, safety risks. Seemingly low-cost bulbs with a shorter lifespan create unsafe working conditions and increase long-term costs. Using LED lighting can minimize these concerns; below are why LEDs are a better alternative in the mines.

  1. Low maintenance costs

The high vibration conditions on mining equipment cause constant and rapid movement, detrimental to traditional fixtures. Therefore, operators find this one of the main challenges since they often need to replace the lighting. Lighting maintenance can be costly, time-consuming, and inconvenient to the operators, whether it is just repairing a broken lamp or replacing an entire fixture. For this reason, it is essential to invest in LED explosion proof work light since they are made with tempered glass, which is more potent than other glasses. Their components are not vulnerable to the constant vibrations and shock at the mines.

  1. Durable

Mines operate round the clock and have strict operating guidelines; therefore, lights are usually on most if not all the time. The life expectancy of lights in the mines should be longer. The life expectancy varies between different light sources; for example, filament light sources can illuminate for between 1000 and 4000 hours, while incandescent will last up to 4,000 hours. Therefore, using conventional light sources increases the need for replacement.

LEDs can operate for at least 50,000 hours; therefore, replacing incandescent lamps with LEDs gives you value for money. You won’t have to replace the bulbs often, and there will also be reduced cases of burnout. Therefore, LED lighting is a better alternative if you look to save money and promote productivity at the mines.

  1. Reduced risk of sudden and unexpected outages

Underground mines tend to be very dark; therefore, it is only reasonable for them to be well lit. More than just illumination, the lighting sources need to be long-lasting. Poorly-lit mining areas increase the risk of serious injuries which may result from trips or falls. Consequently, mining operations may seize for a moment, costing time and money.

Since lighting is essential for productivity at the mines, you don’t want sudden and unexpected outages. Although all lightings become ineffective after some time, LEDs don’t stop illuminating suddenly as other light sources would. Instead, LEDs produce dim light as they reach the end of their lifespan, allowing for time to replace the lights. Fluorescent and incandescent lighting usually burn out without warning, interfering with mining operations.

  1. Safe

Usually, a lot goes on at the mines, from the loading of haul trucks to constant vibrations of mining equipment and the high dust content; these variables pose a unique challenge in securing durable and safe lighting. With all these continuous going on in mines, you want lighting that is likely to suffer an inner arc tube rupture, showering molten glass on the people and the area.

LEDs are durable since they are designed to withstand high vibrations common in mining environments and do not have glass envelope or filaments that could rupture. They also provide a consistent light source and eliminate the risk of vision impairment from inconsistent lighting. On the other hand, traditional lighting, including fluorescent, high-intensity discharge, and incandescent lighting, has a short lifespan and provides uneven lighting. Therefore LEDs are a safer and better alternative to illuminate the mines.

  1. Energy-saving

Replacing incandescent and fluorescent lighting with LEDs can reduce kWh energy usage by 50-70%; energy use reduces by half in areas where lights remain on during the day. The light control technology in LEDs eliminates light pollution, glare, and light spill. Therefore, operators can ensure that the lights are used responsibly.

Upgrading from traditional light fixtures to LED lighting improves safety, lowers costs, reduces errors, enhances energy efficiency, and promotes productivity. The initial installation may be costly compared to conventional lighting, but you get to save more money in the end. Make the switch to LED lighting for the long-term benefits of the company and its workers.

Related Articles

Back to top button